Hi, I finally got time to do the install of Evo one with thar hon3 harness on 2015 honda civic push start, but it didn't work, I flashed the module and set everything as the instructions said, option 2-2 and 38-2, and C1 D2 and I did the install programming on the module and the programming worked, after that went back to computer to do the final flash (Dcryptor) went back to the car and connected all the wires in the order as described and sonnest I connected the main harness all the lights on the panel of the car came on, then I tried to start the car by using 3x on lock but all it was doing was clicking, then I tried to star with push of the ignition bottom and it came on for like two seconds then turn off again by it self, a message on the car panel saying to check the keyless system or starting system something like that, I don't remember exactly the message, then tried to turn everything off by pushing the start bottom but it didn't turn off, it was just toggleing between accessories and on, the only way that it turned off completely was by disconnecting the evo one module. I disconnected the harness and put car back as it was and is working normal, but The remote start could not get it to work, can you please help me, The only wire that I didn't connect from the thar hon3 harness is the one for the horn, but the parking lights I did.
thank you.